Search Pal Business Marketing

The second half of the drying process of water damaged homes or buildings should begin by removing any water damaged items from the home like furniture, paintings, photographs, and etcetera and allowing them to dry out outside the home. Squeeze as much water as possible out of couch cushions and try to leave them outside in the sun for as little time as possible, because sun damage can also occur if they’re left exposed for too long.

If the floors of your home are covered in mud or silt, washing them with clean water is usually the only solution. Don’t rush the drying of the floors or what is called warping or buckling and if you can, remove any insulation from under the floor to allow air to circulate. Rapid drying of hardwood floors by using heating, air conditioning, or other forced air to help dry the floors can cause cupping. Completely drying them naturally can take weeks or months.

Any electrical components in the house, like AC outlets, should be replaced if the water level was high enough to damage them. Again, make sure there is no electricity running to that area of your building or even to the entire building itself. When dealing with flooded properties, the possibility of electrocution is great.

Don’t be so quick to remove all the water in your basement. The walls of the basement could collapse due to the ground outside that is still saturated with water and the water still standing in your basement could be the only thing stopping this. After the water around the house has drained away, pump out two or three feet, mark the water level, and wait until the next day. If the water level in the basement rises, don’t continue pumping out the water.

In most cases, washing wet mud away from objects with clean water before drying them is a good idea. Unless it’s an antique item of special significance, this is generally the way to go. If it does fall into the category of antique or historic, consult a specialist as quickly as possible.

Air circulation through the building is essential to drying it out entirely. Heaters should not be used and air conditioners should be used sparingly, if at all. Forcing the building to dry unnaturally can possibly cause even more damage.

Article By Propterty and Water Damage - New Haven Basement Flooding

As you can imagine, drying out a home or other building that’s been submerged in water, whether it’s flood water or rain water, can be quite a daunting task. Here we’ll discuss a few different ways to begin the process.

A flood can happen in almost an instant, but drying out a home or other property can take a long time. Depending on the property you’re trying to dry out, using hot air drying techniques may damage the building, especially if it’s a historical one.

Before beginning the drying process, be sure to address the electrical hazard. Make sure all power to your home is completely off. Just because the power is off for all your neighbors, don’t assume that yours is off, too. This could be a very fatal mistake. Not only should you be careful of electrical hazards, but biological ones, as well. Flood waters such as those caused by Hurricane Katrina can be contaminated with human and animal waste, all manner of chemicals, and even cadavers. Protect your eyes, mouth, hands, and wear a respirator. Wash your hands in disinfectant soap after a session of cleaning and again before you eat.

Take pictures of the damage with a camera or if possible, videotape them. This documentation will make it easier when you begin negotiating with your insurance adjuster on what compensation you will be eligible for.

Make any repairs necessary to keep water from re-entering the home. These repairs should only be temporary while you get the majority of the building dried.

Any effort to begin drying out a home is the attic. Any wet insulation should be removed as quickly as possible; it is no longer useful, but it is heavy and holds moisture for quite a long time and will continue to cause damage to wood, metal, and drywall. If anything in the attic is soaked with water, remove it. These waterlogged items are heavy and can cause the ceilings to crack. Fresh air circulating through your home is a good way to begin and if you have any fans, turn them on once you’re confident that you can’t become electrocuted simply by walking around.

Opening the windows throughout the house (as long as it isn’t raining) will help and at this time you should begin to wash down any wooden items in the home in order to remove mud, silt, and other debris.

Article By www.localrestoration.com - Fire and Smoke Cleanup